ENTTEC’s DIN Pixie allows control of 2 DMX universes of SPI pixels. Control a maximum of (256 RGBW / 340 RGB / 1024 White) LED’s. Select between control modes and innovative grouping functions. The DIN PIXIE has 4 personalities control how the two DMX-512A inputs are used to control pixel fixtures, providing flexibility to your installation. Configuration, updates and standalone show upload is undertaken through a robust USB type-B port. Standalone mode allows playback of a pre-recorded sequence with advance control option such as, play count, loop delay and play on power up. Alternatively, the DIN PIXIE can be controlled via the USB Type-B connector using the PIXIE DRIVER API. The DIN Pixie is powered by connecting it to the same power source as your LED pixel strip or Dots with a wide 5-48vDC input range. Use ENTTEC’s free PRO-MANAGER software to test, update and configure your DIN Pixie. Features - Convert 2 DMX universes of DMX512 to Pixel Strip/Dots control protocols. - Configurable DMX start address and pixel grouping function to reduce control channel requirements. - Standalone show playback using inbuilt flash memory (4000 frames [~100 seconds]). - Option to play a show on DMX loss or blackout output. - Support for RGB and RGBW pixel strip and dots. - Wide (5-48VDC) operating voltage - power from the same source as your pixels. - All ports feature ESD surge protection and resettable fuses to block external faults & electrical noise propagation through control infrastructure. - Power and output status LED indicators. - Configurable and updatable via USB. - DMX input on RJ45 connectors. (ANSI E1.27-2). - Robust USB type-B connector. - Pluggable screw terminal output connectors. - Test output sequences via PRO-MANAGER (no external data source required). - Widely compatible FTDI driver USB support. - Backward compatible with the ENTTEC Pixie Driver API for USB -> SPI control.